Traxstech Vertical Trees - VBT

Traxstech offers Vertical Bird Trees with 2, 3 or 4 Rod Holders

They slide into our Traxstech mounting track system.

If you use in-line planer boards for lead core, copper line or just long lining this is the ultimate rod holder system for you.

Our exclusive post design allows independent rod holder adjust-ability.

Each holder has six available positions in a 90-degree area for maximum spread of rod tips, allowing easier turns virtually tangle free. The concept of the vertical tree mounted as far forward as possible allows full gunwale for the board rods, divers, and corner downriggers, keeping the transom completely open for netting and resetting baits.We have also used this vertical tree in situations where space is limited and the top holders were used for boards and the bottom one for a diver rod.

Part # VBT-2 / Traxstech Vertical Tree with 2 Rod Holders

The VBT-2 is from the bottom of the post to the top of it about 16” and has 2 VBT-10 rod holders on it. Keep in mind that if you have the top rod holder in an upright position at the top you need to add another 10 inches or so to that height.

Part # VBT-3 / Traxstech Vertical Tree with 3 Rod Holders

The VBT-3 is from the bottom of the post to the top of it about 29” and has 3 VBT-10 rod holders on it. Keep in mind that if you have the top rod holder in an upright position at the top you need to add another 10 inches or so to that height.

Part # VBT-4 / Traxstech Vertical Tree with 4 Rod Holders

The VBT-4 is from the bottom of the post to the top of it about 39” and has 4 VBT-10 rod holders on it. Keep in mind that if you have the top rod holder in an upright position at the top you need to add another 10 inches or so to that height.

**Track not included**

Additional items we sell that will work with the VBT's are the following:

Part # BH-100V - vertical beverage holder

Part # PBCV-3 - vertical planar board caddies for salmon boards

Part # PBCV-4 - vertical planar board caddies for walleye boards

I had an accident with my VBT and bent the post. Do I have to buy a brand new VBT? or can I buy just the post?

We know that accidents do happen, so we sell just the replacement VBT post

Part #VBT-125 is the replacement post for our VBT-2.

Part #VBT-135 is the replacement post for our VBT-3.

Part #VBT-145 is the replacement post for our VBT-4.

If you have damaged any of the VBT-10 rod holders on it, replacement rod holders are available look up part# VBT-10.

Proudly made in the USA!

Has our signature textured finish:

• Adds durability to the aluminum components, hardens your wear surface, no bright reflection, easy to clean.
• Every aluminum part is anodized after our texturing process to provide the highest quality available.
• Salt spray tested and proven.

Comes in 2 color options:

• Clear / Silver
• Black