High Resolution Display: 525 BitsHigh-Speed Real-Time LED ReadoutBacklit Depth Scale for Easy Visibility in Low Light ConditionsThree-Color Display: Red = Strong Signal / Orange = Medium / Green = WeakFive Depth Scales: 20', 40', 60', 80', and 200' Exclusive Interference Rejection: 10 StepPower and Sensitivity: 400 Watts Peak-to-PeakFrequency: 200 kHzTarget Separation: 2.65"Target ID: .5"Weatherproof High Impact CaseDimensions: 4.4"H x 6"W x 2.5"D - Weight: 12 lb.Voltage: 12 VDC - Current draw: 200 MA
- Pre-drilled holes for optional accessories. - Easy access semi-enclosed battery compartment. - Built-in transducer holder fits all sizes of Ice-Ducers. - Specially designed base fits on top of a five gallon bucket. - Pre-tapped transducer support eye-bolt hole. - Large cable storage compartment. - Auto Zoom Mode (AZ) - Gives a half screen zoom window of the bottom six feet of depth. No matter if you're in 10 feet or 100 feet, the bottom six feet always fills half of the screen. This gives you resolution never before possible in deep water! - Bottom Lock Mode (BL) - Works the same as Auto Zoom, but locks the bottom so it will not move with changes in depth or boat motion. Spot a Walleye near the bottom at 40 m.p.h.! - Low Power Mode (LP) - Reduces the output power by 50%. This feature takes the place of the Vexilar S-Cable. Both the AZ and BL modes are available within the LP mode. - Super Bright and Rock Solid Display - The new Light Emitting Diodes along with a high power driver circuit and a screaming fast wheel speed gives the - -FL-18s display unmatched brightness and signal clarity. - Five Depth Ranges - The Standard FL-18 includes 20', 40', 60', 80', and 200 foot ranges. The Deep Range unit includes 30', 60', 90', 120', and 300 foot ranges. - Interference Rejection - Pressing in on the Gain knob cycles you through ten different IR setting to allow you to knock out interference from another close by depth finder.